2 de marzo de 2020

Estufa tipo "cohete" 4 / Rocket mass heater 4

Ranuré la pared para colocar la chimenea en la futura sala.

 I made a groove in the wall  to install the chimney in the living room,


De esta manera la chimenea estará aislada; espero que los gases de combustión se mantengan más calientes y con ello se haga un buen tiro. Adicionalmente, se reduce el riesgo de fugas de monóxido de carbono (CO).

Thus the chimney will be isolated, I hope that the fumes are kept hotter and make a stronger draft, In addition, the risk of leaking carbon monoxide (CO) is reduced.



Tuve que romper mucha piedra y remover una buena parte de los sobrecimientos para permitir el paso del intercambiador de calor.

I had to break stone and remove a section of the overfoundation to clear the path for the heat exchanger.



Presenté la tubería necesaria para el intercambiador de temperatura.

I laid out the piping for the heat exchanger,




Esto me permitió definir el lugar exacto para la estufa "rocket", que será el corazón de todo el sistema.

This allowed me to determine the exact placement of the rocket stove, which will be the heart of the system.



¡¡¡y finalmente comencé a colocar los ladrillos refractarios con el cemento especial!!!

And finally I started laying the refractory bricks with the special mortar!!!


Este es mi primer experiencia con ladrillos refractarios. Fue un trabajo mucho más sencillo de lo que creía, ya que los ladrillos son extremadamente rectos y de dimensiones muy precisas. Solamente tenía que "enmantequillar" con una delgadísima capa de cemento y colocar el siguiente ladrillo en su posición.

This is my first experience with refractory bricks. It went much easier than expected, since the bricks are extremely straight and with exact dimensions. I only had to "butter" with very thin layer of cement and lay the next brick in its position.



Y en breve tuve lista la base de la estufa.

And shortly thereafter,  the base of the stove was ready

1 comentario:

Archivo del blog